Teletype 43 Teleprinter Basic RO, Service Manual

Page: 110 / 222

406,2-20 .
D. LUBRICATION (Cont)
2. LUBRICATION PROCEDURES (Cont)
Pressure Roller Bail Spring - Two' drops of oil
each end (2 places- Friction Feed only).
Platen Tray Shaft - Two drops of oil each end
at the side plates (2 places- Friction Feed only).
Pressure Roller Bail - Two drops of oil each end
at pivot points on each side of bail
(2
places
-
·
Friction Feed only).
Carriage and Nut Engaging Surfaces:
(a) Two Nut Drive Arms - Grease four
bearing surfaces.
(b) Nut Keying Arm - Lubricate by packing
carriage engaging slot with grease.
Print Head:
(a) Active Armatures and Outer Pole Plate -
Grease at the upper pivot area as well
as the lower locator area (9 places).
(b) Print Wire Well Area - Completely fill
with grease.