Teletek electronics LCD 63VG, User Manual

Page: 17 / 28

LCD63VG Keypad User Manual 17
Description
Overview
The LCD63VG keyboard provides complete
control and information of the CA60Plus con-
trol panel.
The control panel can be fully programmed
from the LCD63VG keypad.
A LCD display and LED indication visualize
alarm and status information.
A sound buzzer informs the user about cor-
rect and incorrect key entries as well as ac-
tivated alerts.
Seven voice messages provide the user with
additional information for the system status:
arming or disarming, alarm in the system,
etc.
LED Indication
LED Lit Blinking
RDY
(green)
System
ready
Programming
mode
ARM
(red)
System
armed
Exit time
TRBL
(orange)
-
Technical
problem
Sound Indication
There are seven different sound combinations
that indicate seven different conditions:
♦ Click – single short beep indicating button
pressing.
♦ Confirm – two long beeps, indicating the
system confirmation to executed operation
(arming, disarming, settings change, etc.).
♦ Reject – single long beep, indicating incor-
rectly executed operation.
♦ Entrance time – continuous beep, indicat-
ing intrusion into the entrance zones.
♦ Exit time – short beeps, indicating the
system is armed and the user is required to
leave the zone. Ten seconds before the exit
time is over, beeps frequency is increased.
♦ Trouble – two short beeps, indicating prob-
lem with the system (battery low, no supply
voltage, etc.).
♦ Chime – short beeps with subsequently
increasing period indicating intrusion into a
zone with a “Chime“ option activated.
Voice Messages
There are seven different voice messages
that indicate different system statuses:
“System is armed”
“System is disarmed”
“Please, enter your code to disarm”
“AC power is lost”
“Battery is discharged”
“Please, leave the premises”
“ Alarm in the system”