Teletek electronics LCD 63VG, User Manual

Page: 22 / 28

22 LCD63VG Keypad User Manual
LCD displays:
Each number in the LCD bottom correspond
to a certain system trouble. The symbol
surrounding a number indicates the respec-
tive trouble occurence.
Note: In the events of AC loss and low battery,
the “ AC power is lost ” or “ Battery discharged ”
messages will sound correspondigly 3 times
every 5 seconds.
Events Memory Review
To review the event memory the user is re-
quired a personal code.
Note: Certain users may not be allowed to
review the event memory.
Previous event
, next event
To view the code, the time and the date of the
event use the following buttons:
Hour : Minute
Day Month
Event code, Zone/User
(Blinking)
Example:
LCD displays:
There has been an alarm
event in the 4
th
zone at
21:08h. By pressing but-
ton are viewwd
the day and the month of
happening and by press-
ing button - the
event code, Zone/User respectively (See also
the Tble of events on page 26).
User Level Programming
Blinking symbol indicates the system is
in programming mode.
User Code Changing
User is required to enter his/her personal
code first before changing it.
User code changing key sequence:
Turning On and Off the Chime Mode
To turn the chime mode on or off the use is
required a personal code.
Turning the chime ON and OFF key se-
quence:
Tamper
Communication error
Phone line error
Fuse blown
Battery low or missing
Power supply loss
CODE
NEW
CODE NEW
CODE
( ) 4 digids (2 ) beeps ( ) once again
CODE
CODE