Teletek electronics LCD 63VG, User Manual

Page: 24 / 28

24 LCD63VG Keypad User Manual
Changing User Code and Privileges
Manager is required to enter his/her personal
code first before user code.
User code changing key sequence:
Now the manager can switch using the
keys between code changing
mode and user permissions mode.
Initially the system is in code changing mode.
LCD displays:
The number of the sym-
bols surrounding the figures
indicate the number of the
code digits left to enter.
The manager is expected to enter a new
code.
Entering a new user code key sequence:
The new code is accepted and the system
automatically goes into the user permissions
mode.
The symbol surrounding a number indi-
cates the user is allowed to execute the re-
spective operation.
Pressing a numeric key permits the respec-
tive operation. The operation number is sur-
rounded by the symbol. Pressing the same
key once again forbids the operation. The
symbol is removed.
If all operations are forbidden, the user’s per-
sonal code is erased.
Pressing
confirms the selection.
User permissions key sequence:
Turning On and Off the Chime Mode
To turn the chime mode on or off the manager
is required a personal code.
Turning the chime on and off key se-
quence:
Pressing any numeric key switches alterna-
tively the chime mode on and off. Pressing
confirms the selection.
CODE
User
ID
(0-16) (2 ) beeps
NEW
CODE NEW
CODE
( ) 4 digids (2 ) beeps ( ) once again
Bypass
Review events memory
Force arm
Stay arm
Full arm
Disarm
CODE
Chime OFF Chime ON