Telereef Controller - User Manual V.140313
!
First Time Setup
!
!
• Mount the Telereef Controller
!
!
Telereef Controller comes together with one pair of Self-Stick
Reclosable Fasteners, you can use it to mount Telereef Controller
somewhere on aquarium cabinet. Clean both surfaces before stick it
on.
!
This reclosable fasteners is very strong, you may consider to cut it
into two small pieces and stick them on two corners on the back of
Telereef Controller for easy removing.
!
• Obtain IP Address and set up system time
!
!
Because of simplified no button design, the only way to set up Telereef Controller is
through the Telereef’s Web Interface. First thing to do is find out how to connect to
Telereef Controller through the network connection.
!
1. Connect Telereef’s LAN port to one of the LAN ports on your router.
(
Telereef Controller can be connected wirelessly by using a small Traveller Nano
Router, please refer to Wireless Connection section for details.
)
2. Connect Telereef’s DC port to a 12V 2A DC power adapter.
!
3. After connected DC power the LCD backlight will light up, and firmware version will
be displayed, now Telereef Controller is trying to obtains an IP address from the
router, the IP address will be displayed after a few seconds, please write down this
IP address for future use.
!
!
• Understand Web Interface and Setup System Time/Date
!
There are two main pages on Telereef’s Web Interface, they are Home page and Setup
page. Home page is used to present sensors information, socket status, socket manual
on/off, wireless dosing pump status, manual dosing control, usage statistic, etc.
4
