Eye
III+
VXB
I
nstallation Guide
Page 90
General Terms Discussion
C
GENERAL TERMS DISCUSSION
Before you start to configure the transmitter, you may need to know some of the terms and
information used in the transmitter.
Registration Checking
Users need to do the registration in the Reception Software (e.g. WRS3-AD) for
authorization before the transmitter can be used when such feature is enabled in the
VXB
. This option can be applied to improve the security protection for the organization
when higher security level is required. If the transmitter is decided to open for public use,
you can disable this feature so that public users do not need to register for viewing live
video from the reception software.
Video Mode
There are two sets of video resolution settings available in the transmitter. The
Speed
set offers
128x96
,
256x192
and
512x384
pixels while the
Quality
set offers
160x120
,
320x240
and
640x480
pixels. As the name indicated, the
Speed
set will increase the
transmitter’s video performance in speed while the
Quality
set in quality. You can only
have one set being active during the transmitter’s day-to-day operation. This setting
should be configured during the installation of the transmitter. For ideal performance in
speed, please choose the
Speed
option.
Note that you cannot set the video performance at the client side software (i.e. WRS3-
AD) which is used to monitor the site through the transmitter. Instead, you can only do
so while configuring the transmitter which will be discussed in a later section of this
manual.
Built-in Web Server
In order to view live video anywhere, at anytime, in the most convenient way, you can
enable the
Built-in Web Server
so that any PCs connecting to the Internet can be your
remote site without installing or configuring any software to monitor any places you
want. In this case, when you go traveling or on trips, you can also view the site by just
using web browser! No additional procedures or settings are needed and you can just
type in the your site address (e.g.
http://www.hkpublic.teleeye.teleeye.net/
) in the web
browser and view the site immediately. To see how to use this, please read section 6.
It is recommended that the above items should be configured before the first time you use
the transmitter no matter which connection method you use. The steps to set the above items
APPENDIX
