Eye
III+
VXB
I
nstallation Guide
Page 26
Installation of
Eye
III
+
VXB
for Remote Monitoring
5.
DNS address enables your
Eye
III+
VXB
using the
sure
LINK
address to update its
IP address to TeleEye’s
sure
LINK
server, the refresh rate indicates the time duration for
updating. Duration of 15-45 minutes is frequent enough.
6.
After finish all configurations, power resets the
Eye
III+
VXB
to make the new
values effective.
7.
Try to use a web browser (eg. IE) to connect to
Eye
III+
VXB
by entering its
sure
LINK
address, you can see the video on browser if all your settings are correct. (Note:
you must enable the built-in web server of
Eye
III+
VXB
before doing the testing)
D.
Setup
Eye
III+
VXB
for Broadband Internet connection with dynamic IP using
Broadband dialer
Connection topology:
It is possible to share the Broadband Internet access without an Internet router. Instead, a
dedicated PC is required to control the ADSL modem to connect to the Internet. This dedicated
PC will obtain a “real” but dynamic IP from the ISP, a proxy server is thus required to act as a
gateway between
Eye
III+
VXB
and the Internet.
[ SURELINK SETUP ]
ENABLE
NO
ADDRESS WW…TELEEYE…
REFRESH RATE (MIN) 15
DNS SERVER 1
0.0.0.0
DNS SERVER 2
0.0.0.0
BACK
•
Select the
[ENABLE]
item, then use
the left and right arrow button to select
YES
•
Enter
the
[ADDRESS],
[DNS
SERVER1], [DNS SERVER2]
item,
and change them to the correct value
•
Exit all menus to save the settings
