Eye
III+
VXB
I
nstallation Guide
Page 71
Hard Disk Installation and Formatting
5
HARD DISK INSTALLATION
AND FORMATTING
Installation of Hard Disk
If you want to change the hard disk of
Eye
III+
VXB
, you need to do the hard disk
installation procedure.
Eye
III+
VXB
support ATA standard hard disk, it is highly
recommended that you use the hard disk listed at the end of this section.
CAUTION: The Hard Disk should be set to MASTER MODE.
Procedures:
1.
Remove the hard disk rack as illustrated in the following diagram
2.
Open the cover of the hard disk cartridge provided by
Eye
, you will see a power
cable and a 80-pin IDE cable
3.
Plug the power cable and the 80-pin IDE cable to the hard disk, and insert the hard disk
into the rack
4.
Fix the position of hard disk on the rack by fasten the screws
5.
Cover the hard disk rack, and insert the hard disk into
Eye
III+
VXB
SECTION
