Teledyne TIENet 310 Ex, Installation And Operation Manual

Page: 18 / 42

TIENet® Model 310 Ex Ultrasonic Level Sensor
Section 2 Installation and Setup for Signature
2-4
Note
The SHIELD wire is the bare drain emerging from the foil
s h i e l d a r o u n d t h e Y E L L OW a n d B ROW N w i r e s. T h e
BRAID-DRAIN wire is the bare drain emerging from the sur-
rounding braided shield inside the cable jacket. It is not neces-
sary to prevent the two braids from coming into contact with
each other.The drain wires need to be kept very short.
Figure 2-3 TIENet Device terminal connections
5. Press the terminal strip back down into its socket on the
case board, as shown in Figure 2-5, taking care not to
strain any wire connections. The 310 Ex sensor cable does
not include a reference air connection (Figure 2-4).
Figure 2-4 Attach wired terminal strip to case board socket
Braid-Drain
Shield