Teledyne TIENet 310 Ex, Installation And Operation Manual

Page: 11 / 42

TIENet® Model 310 Ex Ultrasonic Level Sensor
Section 1 Introduction
1-3
1.4 Technical
Specifications
Table 1-1 310 Ex TIENet Device Specifications
a
Sensor Dimensions

3.63"

x 4" tall (9.1cm

x 10.2cm tall)
Cable Length 10 or 23 meters standard (32.8 or 75.5ft) standard
Mounting Attachment
3
/
4
" NPT Pipe thread nipple w/ Conduit lock nut
Weight 4 lbs (1.8 kg)
Body Material PVDF
Enclosure IP68 when connected and properly sealed with cord-grip fitting.
Temperature Range
Operating (compensated)
Storage
Hazardous Locations -22 to 140°F (-30 to 60°C)
-40 to 158°F (-40 to 70°C)
-40 to 140°F (-40 to 60°C)
Measurement Range Minimum: 1 ft (0.3m) from sensor to liquid surface
Maximum: 11 ft (3.3m) from sensor to liquid at minimum level
Measurement Accuracy
at 72 °F (22 °C) ±0.02ft (0.006m) at 1ft level change or less;
±0.03ft (0.009m) at greater than 1ft level change
Temperature Coefficient within compensated
range
± 0.0002 x D (m) per degree C
± 0.00011 x D (ft) per degree F
(Where D is the distance from the transducer to the liquid surface)
Beam Angle 10° 5° From center line
Ultrasonic Signal 50KHz
Certifications Group
II
, Category 1G (zone 0), T4
Class
I
, Division 1 (and Zone 0), T4
a. All specifications are subject to change without notice.