Operator’s Manual Simple AFG Application
53
Waveform
Parameters
AM, FM,
PM, PSK,
FSK
PWM
Sweep
Burst
Arbitrary
Amplitude, Offset,
Frequency, Phase
√
√
√
Note:
Consult the instrument datasheet to find out the specifications of frequency range for each
waveform.
You can assign the “
Arbitrary
” waveform using the combo box highlighted in figure below (refer to
“Waveform List” description paragraph):
Note:
When Arbitrary waveform is selected, the amplitude and offset of the original waveform are lost
because the waveform in normalized. Anyway, the amplitude and offset of the normalized waveform
can be modified as for any predefined waveforms.
Note:
In Stopped State the instrument stops at the Baseline Offset of the selected channel for all the
waveforms except for:
•
Pulse Waveform
–
Stopped State: Low Level[V] if the polarity is positive or High Level[V] if the
polarity is negative.
•
Double Pulse Waveform
–
The stopped state is the Offset[V] parameter.
