Piranha4 8K Color Camera User's Manual
85
Teledyne DALSA
03-032-20156-02
Full N ame
Disable Esc Key
Mnemonic
DEK
Argument(s)
Mode
0.
Esc key is enabled
1.
Esc key is d isabled
D escription
Allow the use of the Esc key to be disabled so that upon boot-up the camera will directly enter
the ASCII command mode. With the Esc key disabled the GENCP cannot be accessed.
N otes
To access the GenCP, you have to first issu e the DEK 0 com m and in ord er to enable the
Esc key. Then reboot the cam era.
Full N ame
Mnemonic
FCS
Argument(s)
File selector
0.
User Set
1.
User PRN U
3.
FPGA
4.
Microcod e
5.
CCI
6.
XML
15.
User FPN
16.
Color correction m atrix
D escription
Up load file to cam era u sing Xm od em p rotocol (H yp erTerm inal)
User set, PRN U, FPN , and color correction m atrix are saved in the cu rrently
active set
Location to save color correction m atrix is sp ecified w ith CMS com m and
N otes
1.
Enter ―FCS <#>‖ com mand from HyperTerminal
2.
Click on ―Transfer‖
3.
Brow se and find file
4.
Select ―Xmod em‖ protocol
5.
Click ―Send ‖
6.
When it ind icates that it is d one click ―Close‖
7.
Up load all files and then reset cam era
Full N ame
Flatfield Mode
Mnemonic
FFM
Argument(s)
Mod e
0.
Disable u se of u ser FPN and PRN U flat field
correction coefficients
1.
Enable u se of u ser FPN and PRN U flat field
correction coefficients
2.
Reset u ser FPN coefficients to zero and u ser
PRN U coefficients to one
3.
Scan d irection controlled u ser set load ing
D escription
Set flat field m od e
N otes
