Operator's Manual
6. On the Send Wave pop-up, choose the:
l
Target WaveStation from the
Device List
. All connected devices will appear for selection.
l
Store location
Arb 1 or Arb2 (depending on the size of the file you're saving).
l
Name
of the file.
l
Transfer
channel
. 512k files can only be sent over CH2.
Click
Send
.
A status message should appear indicating the read completed successfully.
NOTE
: When you save a data file to a location already containing previously stored information,
your new
information always overwrites the old
. If you choose the wrong bank or transfer channel for the size of the
file, you'll see the following error message.
922869 Rev B
39
