WaveStation 3000 Function and Arbitrary Waveform Generator
When you first press the Save softkey during the Save procedure, the keyboard is displayed with the default
File Name shown at the top. To change the name:
1. Press the
Delete
softkey to clear characters from the File Name field.
2. Use the
Adjust
knob and the
Up
and
Down
softkeys to navigate to characters on the keyboard.
3. When the desired character is selected, press the
Select
softkey to insert it in the File Name field.
4. Repeat until you have entered the desired File Name, then press the
Save
softkey.
Save/Recall Setups
1. If saving to (or recalling from) a USB drive, insert the drive into the USB host port on the front of the
WaveStation.
2. Press the
Utility
function button, then press the
Store/Recall
softkey.
3. Press the
FileType
softkey until
State
is selected.
4. WaveStation defaults to the Local (C:) folder. If using an external drive, press the
Browser
softkey until
Directory
is selected, then turn the Adjust knob until
USB Device
is selected. Otherwise, skip this step.
5. Press the
Browser
softkey to select
File
. The cursor switches to the file list at the right side of the dis-
play.
6. If using internal storage, turn the Adjust knob to select the desired
STATE
memory bank (1-10).
NOTE
: Any prior data stored in an internal memory will be overwritten when you save. If possible, select a
State that does not already have a setup file associated with it.
7. To
save
the current setup:
l
Press the
Save
softkey.
l
If desired, use the
keyboard
to change the default File Name.
To
restore
the WaveStation to the selected setup, press
Recall
.
26
922869 Rev B
