Operator's Manual
Save/Recall Waveforms
Waveforms files created outside the WaveStation can be saved to and recalled from a memory bank on the
WaveStation.
1. Insert the drive into the USB host port on the front of the WaveStation.
2. Press the
Utility
function button, then press the
Store/Recall
softkey.
3. Press the
FileType
softkey until
Data
is selected.
4. Press the
Browser
softkey until
Directory
is selected, then turn the Adjust knob until
USB Device
is
selected.
5. Press the
Browser
softkey to select
File
. The cursor switches to the file list at the right side of the display.
6. Turn the Adjust knob to select the desired memory bank,
ARB(16k)
or
ARB(512k)
, then press
Select
.The dis-
play changes to show a table of waveform files.
7. Turn the Adjust knob until the desired cell/file is selected.
NOTE
: If possible, choose an empty cell when saving a file. Any prior data saved in that location will be
overwritten.
8. Press
Save
to store the file, or
Recall
to output it using WaveStation.
NOTE
: 512K files must be output via Channel 2.
9. When saving data files, use the
keyboard
to change the File Name.
Delete Setup or Waveform File
Follow the Save/Recall procedures to navigate to the setup or data file. With the file selected from the File List
at the right side of the Browser, press the
Delete
softkey.
Copy Channel Settings
The setups from either WaveStation channel can be quickly copied to the other. Complete your waveform
configuration on the source channel, then:
1. Press the
Utility
function button.
2. Press the
Channel Copy
softkey.
3. Press either
CH1=>CH2
or
CH2=>CH1
, depending on the direction you wish to copy.
4. Press
Done
.
922869 Rev B
27
