![background image](http://html.mh-extra.com/html/teledyne/lecroy-wavestation-3000/lecroy-wavestation-3000_operators-manual_1080583019.webp)
Operator's Manual
3.
Adjust parameters
as necessary using either the Adjustment knob or the numeric keypad.
For all waveforms except Noise
, adjust the values for:
l
Frequency
or
Period
.
l
Amplitude
and
Offset
, or absolute
HighLevel
and
LowLevel
of voltage.
For Sine waves
, also adjust
Phase
.
For Square waves
, also adjust:
l
Phase
l
Duty
Cycle, entered as the percentage of the High Level taking up the whole period.
For Ramp waves
, also adjust
Symmetry.
For Pulse waves
, also adjust:
l
Width
or
Duty
Cycle
l
Rise
(ing Edge) or
Fall
(ing Edge)
l
Delay
For Noise waves
, adjust:
l
Stdev
l
Mean
4. When all parameters are configured, press the appropriate
Output
button to output the waveform, or go on
to apply
Modulation
,
Sweep
, or
Burst
signal conditioning before outputting.
NOTE
: Noise waves cannot be modulated or swept. Pulse waves cannot be swept.
S
EE
A
LSO
:
Generating DC Waveforms
Generating Arbitrary Waveforms
Recalling Stored Waveforms
922869 Rev B
13