WaveStation 3000 Function and Arbitrary Waveform Generator
Changing System Settings
Many default WaveStation settings can be modified through the Utility menu. Follow the procedures below to
change Output and System settings.
See the
Using Sync Out
,
Remote Control
, and
Maintenance
sections for instructions on using other Utility
menu options.
Also see
Restoring Default Settings
.
Output
This setting changes the output Voltage and Polarity on the generated waveform. For output over 10 V pk-pk,
use the HighZ setting.
1. Press the
Utility
function button.
2. Press the
Output Setup
softkey.
3. Press the
Load
softkey until either
50Ω
or
HighZ
is selected.
4. Press
Polarity
to select either
Normal
or
Invert
.
5. Press
Done
.
USB Output
The USB Type B port on the back of the WaveStation can be configured to output either:
l
USBRAW
l
USBTMC, used for remote control and WaveStation PC software
1. Press the
Utility
function button.
2. Press the
Interface
softkey.
3. Press the
USB Setup
softkey.
4. Press either
USBRAW
or
USBTMC
.
5. Press
Done
.
Number Format
1. Press the
Utility
function button.
2. Press the
More
softkey, then press
System
and
Number Format
.
3. Choose a
Point
style of either period (.) or comma (,). This character is placed after the first thousand.
4. Choose a
Separator
of:
l
On
- places the other Point character (period or comma) between whole units and decimals.
l
Space
- uses a space rather than a character to separate whole units and decimals.
l
Off
- no separator.
5. Press
Done
.
28
922869 Rev B
