WaveStation 3000 Function and Arbitrary Waveform Generator
Connecting WaveStation to the PC
To re-establish the link between the WaveStation and your PC after the initial software installation:
1. Power on WaveStation.
2. With the PC turned on, connect the USB Type B-A cable from the rear USB B port on the WaveStation to a
USB A port on the PC.
3. Launch the WaveStation PC software.
Reading Files from WaveStation on a PC
You can retrieve any stored or arbitrary waveform file from the WaveStation and send it to the WaveStation
PC software for modification.
Complete the preliminary steps to:
l
Install WaveStation PC drivers and software.
l
Make the connection
from WaveStation to the PC.
Starting from WaveStation
1. Follow the steps to
generate an arbitrary waveform
, choosing either one of the
Built-In
or
Stored Wforms
.
2. In the WaveStation PC Software, choose
Communication
→
Read wave
from the menu bar.
3. Select the device you want to read the wave from the
Device List
. The software detects multiple devices.
4. Select the stored or built-in waveform from the
Wave List
. You will see all the wave files stored on the
device.
34
922869 Rev B
