Teledyne EV71YC1MCL2010-BA0, User Manual

Page: 43 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 43
7.9 Save & Restore FFC and Configuration User set
GenCP address ASCII
command
GenICam
command
Size R/W Description
0x17000 rcfg
UserSetLoad
4 RW Restore current UserSet from UserSet bank
number <val>, from 0 to 5; <val> comes from
UserSetSelector.
0x17004 scfg
UserSetSave
4 WO Save current UserSet to UserSet bank number
<val>, from 1 to 4; <val> comes from
UserSetSelector. 0 cannot be saved.
0x17008 rffc
RestoreFFCFromBank
4 RW Restore current FFC (including FPN and
FFCGain) from FFC bank number <val>, from 0
to 4; <val> comes from UserFFCSelector (XML
feature).
Bank#[0] are FFC sensor
Bank#[1-4] are FFC user
0x1700C sffc
SaveFFCToBank
4 WO Save current FFC (including FPN and FFCGain)
to FFC bank number <val>, from 1 to 4; <val>
comes from FFCSelector (XML feature).
7.9.1 Save & Restore FFC
The new-processed FFC values can be saved or restored in/from 4 x User banks.
Both Gains and Offsets in the same time but also the FFC Adjust User target and associated gain.
These functions are available in the Flat Field correction/Save & Restore FFC section :

Restore FFC from Bank ( RestoreFFCFromBank ) : Restore the FFC from a Bank in the current FFC.

Read function : “ r rffc ” (ASCII): Get the current FFC Bank used
Returned by the camera : 0 for Factory bank or 1 to 4 for User banks

Write function : “ w rffc <val> ” (ASCII): Bank <val> 1 to 4 for User banks
Note : Factory means neutral FFC (no correction).

Save FFC in User Bank ( SaveFFCToBank ) : Save current FFC in User Bank

Can not de read

Write function : “ w sffc <val> ” (ASCII): User bank <val> if from 1 to 4.
FFC User Bank Usage
Ram Memory
Save
Load
Reset FPN
Reset PRNU
User1
User2
User3
User4
User
At the power up :
- Last User Bank used is loaded in RAM
Reset a User bank :
- Reset the RAM (FPN/PRNU individually)
- Save in the bank to reset