Teledyne EV71YC1MCL2010-BA0, User Manual

Page: 29 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 29
7.5 Image Control

Save Image ( SaveImageControl ) : control the recording of the image in the camera
This command is available in the CommCam “Image Control” section :

Read function (ASCII): “ r recl ”;
Returned by the camera :

“0” : No Record in Progress

“1” : Record in Progress

Write function (ASCII): “ w recl ” <value> :

“0” : Stop Recording

“1” : Start Recording

Play Image ( PlayImageControl ) : control the Replay of the image in the camera
This command is available in the CommCam “Image Control” section :

Read function (ASCII): “ r play ”;
Returned by the camera :

“0” : Camera display the “Live Image”

“1” : Camera display recorded Image

Write function (ASCII): “ w play ” <value> :

“0” : Start Playing Live Image

“1” : Start Playing Recorded Image

FPN coefficients modification : Direct access to the Saved Image in Memory.
The Overall size of the Memory zone is 2 x 4096 Bytes :

Read function (ASCII): “ r alin ”
This Function is available only with the version 2.1.0 of the Firmware
GenCP address ASCII
command
GenICam
command
Size R/W Description
0x12250 recl SaveImageControl 4 RW Record the Current Image
Read :
0 : No Record in Progress
1 : Record in Progress
Write :
0 : Stop Record
1 : Start Record
0x12254 play PlayImageControl 4 RW Play Image :
0 : Play “Live” Image
1 : Play Recorded Image
0x120000 alin ImageControlAccess 2*4096 RO Manual access to the recorded Image