U
SER
M
ANUAL
M
ONOCHROME
–
R
EV
J
–
05/2017
P
A G E
|
15
4
Standard Conformity
The cameras have been tested using the following equipment:
A shielded power supply cable
A Camera Link data transfer cable ref. 1MD26-3560-00C-500 (3M), 1SF26-L120-00C-500 (3M)
A linear AC-DC power supply
Teledyne-e2v recommends using the same configuration to ensure the compliance with the following
standards.
4.1
CE Conformity
The cameras comply with the requirements of the EMC (European) directive 2004/108/EC (EN
50081-2, EN 61000-6-2).
CE 0168
4.2
FCC Conformity
The cameras further comply with Part 15 of the FCC rules, which states that: Operation
is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual , may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference
Warning
: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
4.3
RoHS / Chinese RoHS
RoHS per EU Directive 2011/65/EC and WEEE per EU Directive 2002/96/EC
China Electronic Industry Standard SJ/T11364-2006
4.4
GenICam / GenCP
GenICam/GenCP XML Description File, Superset of the GenICam™ Standard Features Naming Convention
specification
V1.5, Camera Link Serial Communication : GenICam™ Generic Control Protocol (Gen CP V1.0)
