Teledyne EV71YC1MCL2010-BA0, User Manual, Page: 44 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 44
7.9.2 Save & Restore Settings
The settings (or Main configuration) of the Camera can be saved in 4 different User banks and one Integrator bank.
This setting includes also the FFC and LUT enable
This function is available in the Save & Restore Settings section :

Load settings from Bank : Allows to restore the Camera settings.

Read function : “ r rcfg ” (ASCII): Get the current Tap Bank in use

Write function : “ w rcfg <val> ” (ASCII): Load settings from bank <val> (0: Factory , 1 to
4 for Users, 5 for Integrator)

Save settings to Bank : Allows to save the Camera settings in User or Integrator Bank

Write function : “ w scfg <val> ” (ASCII): Save the current settings in the User bank <val>
(1 to 4 for User, 5 for Integrator)
The integrator bank (User Set5) can be written only if the Camera is set in integrator
mode (Privilege level = 1). This integrator bank can be used as a « Factory default » by a
system integrator.
Configuration Bank Usage
Ram Memory
Sav
Load
Factory
Integrator
(Bank 5)
User1
User2
User3
User4
User banks
Load
Save