Teledyne EV71YC1MCL2010-BA0, User Manual

Page: 26 / 59

U
SER
M
ANUAL
M
ONOCHROME
– R
EV
J – 05/2017 P
A G E
| 26
Modes Interlaced
compliance
Connector CL1 Connector CL2 Mode
value
Base 2 Channels 8 Bits

2 x 8 bits - 0
Base 2 Channels 10bits

2 x 10 bits 1
Base 2 Channels 12 Bits

2x 12 bits - 2
Medium 4 Channels 8bits (High Speed Version Only)

4 x 8 bits 3
Medium 4 Channels 10 bits (High Speed Version Only)

4 x 10 bits 4
Medium 4 Channels 12bits (High Speed Version Only)

4 x 12 bits 5
Full 8 Channels 8bits (High Speed Version Only)

8 x 8 bits 6
Full+ 10 Channels 8bits (High Speed Version Only) - 10 x 8 bits 7
Base 1 Channel 8 Bits - 1 x 8 bits - 8
Base 1 Channel 10bits - 1 x 10 bits - 9
Base 1 Channel 12 Bits - 1 x 12 bits - 10

Output Frequency ( OutputFrequency ) : Set the CameraLink Data Output Frequency. This value is
available in the CommCam “Image Format Control” section :

Read function (ASCII): “ r clfq ”;
Return by the Camera : Frequency from 0 to 2

Write Function (ASCII): “ w clfq <value>”

“0” : 85MHz

“1” : 60MHz

“2” : 42.5MHz

“3” : 40MHz
Structure of the Camera Link Channels for interfacing

Base 1 Tap Mode : 1 Channels Outputted from Left to Right

Base 2 Taps Mode : 2 Channels Separate, outputted from Left to Right

Base 2 Taps Interlaced Mode : 2 Channels interlaced odd/even, outputted from Left
Ch 1
Output direction for ReverseReading = 0
1st last
Output direction for ReverseReading = 0
Ch 1 Ch 2
1st last