Teledyne 980 DP1.4 User Manual Download Page 9 | Manualshive

Page: 9 / 507

Teledyne 980 DP1.4 User Manual Download Page 9

980 DP 1.4 Video Generator / Analyzer - User Guide

Rev. A1

Page 9

June 16, 2017

1

About the 980 DP 1.4 Video Generator / Analyzer Module

This chapter provides an overview of features of the 980 DP 1.4 Video Generator / Analyzer module and the 980
GUI Manager. The module can be equipped in either of the following 980 Advanced Test Platforms:

1) The 980B Advanced Test Platform

– 5-slot chassis with a 15 inch touch display

2) The 980R Advanced Test Platform - 5-slot rack mountable chassis with a 7 inch touch display

The 980 DP 1.4 Video Generator / Analyzer module supports video pattern testing and audio testing of DP 1.4
capable displays at 8.1Gb/s link rates per 4 lanes. It is equipped with two (2) Tx ports and an Rx port. The two DP
Tx ports are both active simultaneously which enables you to test multiple sinks and displays at the same time. The
Rx port is for the optional DP analyzer for testing DisplayPort source devices up to 8.1Gb/s link rates per 4 lanes.

The 980 GUI Manager is a PC application to manage and use the 980 DP Video Generator / Analyzer module.

1.1

Scope of this User Guide

This User Guide provides descriptive and procedural information on the 980 DP 1.4 Video Generator / Analyzer
module for testing DP display devices.

Although you can operate the 980 DP 1.4 Video Generator / Analyzer module through the

“embedded GUI,” most

of the examples used in the procedures in this User Guide are taken from the external standalone PC 980 GUI
Manager. The procedures are nearly identical between the embedded GUI running through the 980B/980R front
panel display and the external standalone PC application but the look and feel is slightly different.

There are separate User Guides for the other 980B/980R modules. The following is a list of the User Guides
available with the 980B/980R and its modules. These are available from the downloads and product web pages of
the Quantum Data website

http://www.quantumdata.com/products/980.asp

The following is a list of the User Guides available for the 980 systems:



980 HDMI Protocol Analyzer Gen 3 System

– Covers source analysis testing for HDMI and MHL source

devices as well as various transmitter features. This user guide is specifically for the functions of the 980 HDMI
Protocol Analyzer Gen 3 system sold through 2012.



980 HDMI Protocol Analyzer module

– Covers source analysis features of the 980 HDMI Protocol Analyzer

module. Used in conjunction with the 980 Advanced Test Platform Quick Start Guide for purchases in 2013.



980 Advanced Test Platform Quick Start Guide

– Covers startup procedures for the 980/980B platform. Used

in conjunction with the 980 HDMI Protocol Analyzer Module User Guide for purchases in 2013.

«
...
7
8
9
10
11
...
»

Summary of Contents for 980 DP1.4




























































































































































































































































































































































































































































































































Reviews:

No comments