Teledyne 980 DP1.4 User Manual Download Page 202

Page: 202 / 507

980 DP 1.4 Video Generator / Analyzer - User Guide

Rev. A1

Page 202

June 16, 2017

Tab

Field

Description / Function

Interlace

Sets the format scan type to Interlaced. Parameter:
SCAN = 1

Check boxes

Back Porch

Toggles the Pulse Delay field so that the value is
provided for the back porch rather than the front porch.

Clock Pulse

Enables and disables the pixel clock pulse output on
generators that have a pixel clock output available.

The pixel clock output appears on the special sync BNC
connector.

Pre-Emphasis
Not applicable to DP

Enables and disables adding pre-emphasis to the Open
LVDI digital outputs on generators that support LVDI
outputs.

DC Balance

Not used.

Flat Front Porch
Not applicable to DP

Determines if composite sync will have all equalization

pulses removed in the vertical sync front porch (delay)
period as required by certain military HOBO and
Maverik video formats.

Tri-Level Sync

Enables or disables Tri-Level sync.

Repeat Field

Determines if identical video information is output for
each field of an interlaced (SCAN = 2) format.

Summary of Contents for 980 DP1.4




























































































































































































































































































































































































































































































































Search results

Summary of Contents for 980 DP1.4

Reviews:

Teledyne 980 DP1.4, User Manual, Page: 202 / 507

Search results

Summary of Contents for 980 DP1.4

Reviews: