Home
/
Teledyne
/
980 DP1.4
/
User Manual

Teledyne 980 DP1.4, User Manual, Page: 252 / 507

Share

Page: 252 / 507

Teledyne 980 DP1.4 User Manual Download Page 252

980 DP 1.4 Video Generator / Analyzer - User Guide

Rev. A1

Page 252

June 16, 2017

12

Source Verification with Protocol Analyzer (Optional)

The 980 DP 1.4 Video Generator / Analyzer module is equipped with a DP 1.4 Rx port for the optional Network
Analyzer features. There are two analyzer options available:

1) Basic Analyzer

– Emulates a DP 1.4 sink device including EDID, DPCD, MST, Link Training emulation.

Provides real time view of the incoming source video and metadata including status of mainstream
attributes, secondary stream attributes, link training, MST, HDCP. Also provides support for viewing the
Aux Channel transactions using the Quantum Data Auxiliary Channel Analyzer (ACA) application when
testing a DP source.

2) Protocol Analyzer (requires the Basic Analyzer license to be installed)

– Provides capture and store of the

main link protocol, video and metadata including main stream attributes and secondary data from an
incoming DP source device.

12.1

Operational workflow for capturing data with your 980 DP Protocol Analyzer

This subsection describes how to use the 980 DP Protocol Analyzer to capture and analyze DisplayPort source
devices. Testing an DP source device involves the following high level steps:

1. Configure the 980 DP Protocol Analyzer Rx port with the proper EDID.

2. Connecting the DP source device.

3. View the incoming video in real time to check the status of the device under test.

4. Specify a trigger method.

5. Initiate the capturing of the data.

6. Examine the test data through the 980 GUI Manager at the high level view on the

Event Plot

panel or the

Video Analysis panel.

7. Drill down to examine the data at the lower level through the details of the

Data Decode

panel view.

8. (Optional) You may wish to capture and view the raw hex data.

12.2

Opening an Existing Capture

The DisplayPort Protocol Analyzer feature enables you to save capture data for later examination. You can access
existing captures through the

Navigator

utility as shown in the screen shot below. The right click menu enables

you to open a capture. You can also open a capture from the

Open

option on the

File

menu on top (shown below).

«
...
250
251
252
253
254
...
»

Summary of Contents for 980 DP1.4




























































































































































































































































































































































































































































































































Reviews:

No comments