manualshive.com logo in svg

Teledyne 980 DP1.4, User Manual, Page: 15 / 507

Share
Download
Teledyne 980 DP1.4 User Manual Download Page 15

980 DP 1.4 Video Generator / Analyzer - User Guide 

 

Rev. A1 

 

Page 15 

 

June 16, 2017 

 

2

 

Getting Started   

This chapter explains what is involved in getting your 980B/980R system up and operating to capture data.   

2.1

 

What is shipped with the 980 DP Video Generator / Analyzer module? 

The 980 DP 1.4 Video Generator / Analyzer module can optionally be equipped in the 980B/980R Advanced Test 
Platforms. The following items are included with the 980 DP Video Generator / Analyzer module:   

 

DP cable (P/N 30-00162) 

– used for connecting to the 980 DP 1.4 Video Generator / Analyzer module to the 

device under test. 

2.2

 

Operational workflow for DP Video Pattern Testing 

The following are the high level steps you will need to follow to get your 980 DP 1.4 Video Generator / Analyzer 

module up and running.   

2.2.1

 

Procedures covered in 980 Advanced Test Platform Quick Start Guide: 

The following list of activities are described in the 980 Quick Start Guide. 

1.  Remove the 980B/980R from the shipping box.   

2.  Assemble the source device under test into your lab area and power it up. 

3.  Connect the 980B/980R power cable (provided) to a suitable outlet (110-240V 50/60Hz) and apply power to 

the 980. 

4.  (Optional 

– not required if using the built-in display) Select a suitable PC to host the 980 GUI Manager 

application. A minimum of 512MB of RAM is recommended. (Note that you do not need a PC because you can 
use the built-in Front Panel display; however the external 980 GUI Manager provides you with a larger viewing 

area). 

5.  (Optional 

– not required if using the built-in display) Determine how you are going to connect to the 980/980B 

from the external 980 GUI Manager in order to operate the instrument: 

o

  Put the 980B/980R on your corporate network and enable DHCP using an available Ethernet patch cable, 

or… 

o

  Connect directly with a host PC or laptop using the Ethernet crossover cable provided. 

6.  (Optional 

– not required if using the built-in display) Assign an IP address to the 980B/980R either directly or by 

enabling DHCP.   

7.  (Optional 

– not required if using the built-in display) Download the latest 980 GUI Manager application from the 

Quantum Data website:   
www.quantumdata.com/downloads/index.asp. 

8.  (Optional 

– not required if using the built-in display) Install the 980 Manager application on your host PC. 

9.  (Optional 

– not required if using the built-in display) Establish a connection to the 980B/980R from the 980 

Manager resident on your host PC. 

10.  (Optional 

– not required if using the built-in display) Through the 980 Manager “Add” the 980B/980R as an 

Instrument. 

2.2.2

 

Procedures covered in this User Guide: 

1.  Connect the sink device under test to the DP Tx port on the 980 DP Video Generator / Analyzer module. 

Summary of Contents for 980 DP1.4




























































































































































































































































































































































































































































































































Reviews:

No comments