Teledyne 980 DP1.4, User Manual, Page: 19 / 507

980 DP 1.4 Video Generator / Analyzer - User Guide Rev. A1
Page 19 June 16, 2017
Use the following table to identify the connector function and descriptions on your 980R system configuration.
980B Configurations Information / Function
DP Video Generator module
– 980R
The following is a description of each connector:
980 DP Video Generator / Analyzer module:

A
– DP Rx port for analyzing DP sources.

B
– DP Tx1 port for DP video/audio generation.

C
– DP Aux Passive Monitoring module Tx and Rx
for passively monitoring the DP Aux Chan
between a source and a display.
Note : This feature is not currently functional.
980B QD Bus Board:

D
– Internal Ethernet Tx connector; not used.

E
– BNC Trig OUT connector. Not used for this
module.

F
– BNC Trig IN connector. Not used for this
module.

G
– RCA OUT connector for SPDIF function. Not
used for this module.

H
– RCA IN connector for SPDIF function. Not
used for this module.
980B Lower Panel:

I
– Ethernet port for connection to PC host for 980
GUI Manager application, telnet for command line
control and FTP for transferring files.

J
– Various USB ports for transferring files and
restoring system.J
– Various USB ports for
transferring files and restoring system.
A
I
J
D
H
F E G
B
C