Home
/
Teledyne
/
980 DP1.4
/
User Manual

Teledyne 980 DP1.4, User Manual, Page: 335 / 507

Share

Page: 335 / 507

Teledyne 980 DP1.4 User Manual Download Page 335

980 DP 1.4 Video Generator / Analyzer - User Guide

Rev. A1

Page 335

June 16, 2017

16.27

CheckBy6

16.27.1Description

The active video area is equally divided into a 6x6 checkerboard of black and white boxes.

The primary version has four white boxes as shown in the image below. The secondary version has five white
boxes (reverse).

16.27.2Test

Contrast ratio.

16.27.3Purpose

The pattern is based on a proposed ANSI method of measuring the contrast ratio of video projection systems.

Method Using a light meter probe, measure and record the light-level reading (in foot lamberts) in the center of

each of the black and white boxes. The contrast ratio is expressed as the average of all of the white readings
divided by the average of all of the black readings.

«
...
333
334
335
336
337
...
»

Summary of Contents for 980 DP1.4




























































































































































































































































































































































































































































































































Reviews:

No comments