Teledyne 980 DP1.4, User Manual, Page: 206 / 507

980 DP 1.4 Video Generator / Analyzer - User Guide Rev. A1
Page 206 June 16, 2017
Field / Entity Entity Type Description / Function
Not used for HDMI
Gamma
Not used for HDMI Check box Enables or disables Gamma. Used with the entry field
below.
Entry field Enables you to set the Gamma once the Gamma check
box above is enabled (checked). The allowable ranges of
values is 0.1 to 10.0.
Pedestal
Not used for HDMI Check box
Enables or disables the Pedestal. Used with the entry field
below. Pedestal is only supported on NTSC format types.
Entry field Enables you to set the Pedestal once the Pedestal check
box above is enabled (checked). The allowable ranges of
values is 0 IRE to 100 IRE.
Analog Cal. Mode
Not used for HDMI Pull-down select
Sets the analog calibration mode. Determines how the
generator tests and calibrates its analog video outputs. The
following are the selections:

Interpolate

Measure Interpolate

Measure Set Absolute

Test Levels
Analog Color Order
Not used for HDMI Pull-down select Sets the mapping of the analog video colors to the video
output connections. Parameter: AVCO. The following are
the selections:

RGB - R to R, G to G, B to B (default)

RBG - R to R, B to G, G to B

GRB - G to R, R to G, B to B

GBR - G to R, B to G, G to B

BRG - B to R, R to G, G to B

BGR - B to R, G to G, R to B
10.2.8 New Format - General Tab (Bottom Panel)
The bottom panel of the General tab in the Format Editor is shown below.
The table below describes the gating functions of the right-side panel of the General tab.
Field / Entity Entity Name Description / Function
Analog Sync Gate
Not used for HDMI Select buttons Enables you to put the analog composite sync on one of
the components when analog composite sync is selected
as the sync type . Multiple selections can be made.
R Puts the analog composite sync on the Red component.
G Puts the analog composite sync on the Green