Teledyne Lecroy WaveSurfer 10, Getting Started Manual

Page: 26 / 46

USER INTERFACE 22
Sharing Data
Print/Screen Capture
WaveSurfer 10 oscilloscopes offer several ways to preserve and share
data, any of which can be associated with the front panel
Print button .
Pressing Print captures an image of the display, which will then be
handled according to your chosen Print method (sent to a printer, saved
to a file, etc.). Go to Utilities > Utilities Setup > Hardcopy to configure how
the oscilloscope handles the Print command.
Note: To make Print create a new Notebook Entry, go to File >
LabNotebook > Preferences and select Create Entry when Hardcopy
Pressed.
Sending Data
If the oscilloscope is networked, LabNotebook reports, waveform files,
setups, and other user data can be emailed directly from the instrument.
Files can also be transferred to a USB drive through any of the host USB
ports. Exit to the desktop (File > Exit) and use the Windows Explorer to
transfer files from oscilloscope folders to USB drives. Stored user data
files are located on the D: drive.