Teledyne Lecroy WaveSurfer 10, Getting Started Manual

Page: 16 / 46

SET UP
12
Signal Inputs
Mixed Signal Options
WaveSurfer 10 oscilloscopes are compatible with the Teledyne LeCroy
MS-250 and MS-500 mixed signal hardware options. Both offer 18
integrated digital channels and a set of tools designed to view, measure,
and analyze analog and digital signals, enabling fast debugging of mixed
signal designs. Flexible analog and digital cross-pattern triggering across
all 22 channels provides the ability to quickly identify and isolate problems
in an embedded system.
Probes
WaveSurfer 10 Oscilloscopes are compatible with the included passive
probes and all Teledyne LeCroy ProBus active probes that are rated for
the oscilloscope’s bandwidth. Probe specifications and documentation
are available at teledynelecroy.com/probes.
LAN
WaveSurfer 10 accepts DHCP network addressing. Connect a cable from
the Ethernet port on the side panel to a network access device. Go to
Utilities > Utilities Setup > Remote and select TCPIP to obtain a network
connection and IP address.
To assign the oscilloscope a static IP address, open
Net Connections
from the Remote dialog and use the Windows networking dialogs to
configure the device address.
Go to
Utilities > Preference Setup > Email to configure email settings.
Other Auxiliary Device
Connect a BNC cable from Aux Out on the back of the instrument to the
other device. Go to
Utilities > Utilities Setup > Aux Output to configure
the connection.
Language Selection
To change the language that appears on the display, go to Utilities >
Preference Setup > Preferences and make your Language selection.
The oscilloscope software must be restarted after the language is selected.
If you wish to also change the language of the Windows operating system:
1. Choose File > Minimize to hide the oscilloscope display and show the
Windows Desktop.
2. From the Windows task bar, choose Start > Control Panel > Clock,
Language and Region.
3. Under Region and Language select Change Display Language.
4. Click the Install/Uninstall Languages button.
5. Select Install Language and Browse Computer or Network.
6. Click the Browse button, navigate to D:\Lang Packs\ and select the
language you want to install. Follow the installer prompts.
7. After exiting the Control Panel, click the oscilloscope icon in the lower-
right corner of the desktop to maximize the oscilloscope display.
Note: The available languages are: German, Spanish, French, Italian, and
Japanese. Other language packs are available from Microsoft’s website.