Teledyne Lecroy WaveSurfer 10, Getting Started Manual

Page: 38 / 46

BASICS
34
Part Number Description
WS10-1553 TD MIL-STD-1553 Trigger and Decoder
WS10-ARINC429bus Dsymbolic ARINC-429 Symbolic Decoder
WS10-Audiobus TD Audiobus Trigger and Decoder for I
2
S, LJ, RJ
and TDM variants
WS10-CANbus TD CAN Trigger and Decoder
WS10-CAN FD TD CAN FD Trigger and Decoder
WS10-DigRF3Gbus D MIPI DigRF 3G Decoder
WS10-DigRFv4bus D MIPI DigRF v4 Decoder
WS10-DPHYbus D MIPI D-PHY Decoder
WS10-EMB I
2
C, SPI, UART/RS-232 Trigger and Decoder
WS10-ENETbus D 10M and 100M ENET Decoder
WS10-FlexRaybus TD FlexRay Trigger and Decoder
WS10-I2Cbus TD I
2
C Trigger and Decoder
WS10-LINbus TD LIN Trigger and Decoder
WS10-Manchesterbus D Manchester Decoder
WS10-NRZbus D NRZ Decoder
WS10-SENTbus D SENT Decoder
WS10-SpaceWirebus D SpaceWire Decoder
WS10-SPIbus TD SPI Trigger and Decoder
WS10-UART-RS232bus TD UART and RS232 Trigger and Decoder
WS10-USB2bus D USB 2.0 Decoder
WS10-USB2-HSICbus D USB-HSIC Decoder
Software Options
The Advanced Debug Toolkit (WS10-ADT) enhances the acquisition, math and
measurement capabilities of a WaveSurfer 10 oscilloscope. History Mode and
Sequence Mode functions are also added. This option is included with the
WaveSurfer 10M.
Power Analysis Option (WS10-PWR) provides exceptional ability to measure
and analyze the operating characteristics of power conversion devices
and circuits. Measure critical device power switching, analyze control loop
modulation, and measure line power harmonics.
Spectrum Analyzer Option (WS10-SPECTRUM) simplifies setup and use
of the oscilloscope for analyzing frequency-dependent effects. It allows
users who are familiar with RF spectrum analyzers to start using the FFT
with little or no concern about the details of setting up an FFT.
Many
Serial Trigger and Decode options are available (see table).
Decoders apply software algorithms to extract encoded serial data
information from physical layer waveforms measured on your
oscilloscope. The extracted information is displayed over the actual
physical layer waveforms, color-coded to provide fast, intuitive
understanding of the relationship between message frames and time
synchronous events. Serial triggers fire upon finding decoded data that
match complex, user-defined filters.