Teledyne Lecroy WaveSurfer 10, Getting Started Manual, Page: 13 / 46

SET UP 9
Front mounted host USB port can
be used for transferring data or
connecting peripherals such as a
mouse or keyboard.
The Power button turns on/off the oscilloscope. See “Powering On/Off” for
more information.
Channel inputs 1–4 are signal inputs to the oscilloscope; Ext is for
connecting an external trigger device.
Ground and calibration output terminals are used to compensate passive
probes.
The
tilting feet enable easier bench top viewing.
The touch screen display is the principal viewing and control center
of the oscilloscope. See “Touch Screen Display” for an overview of its
components.
The
front panel houses buttons and knobs that control different
oscilloscope settings. Operate the instrument using front panel hard
controls, display soft controls, or a mix of both that is convenient for you.
Many front panel knobs have multiple modes of
operation: pressing them invokes one action and
turning them another. The labels below the knob tell
you what happens when you “Push” instead of turn.
The built-in stylus holder stores
a stylus that can be used with the
touch screen display.