TELE RE-NA003 User Manual Download Page 67 | Manualshive

Page: 67 / 71

background image

Subject to modifications and errors

Page 67 of 71

2019-06-26 edition

Error (1.060)

Display of current error:

M

Measurement error

S

System error

Navi/-. You can access level 2 by pressing the ENT key.

5.2.3

Level 2

Error memory

This is where the latest errors are displayed with a time stamp (time since occurrence).
Both positive, as well as negative error flanks, are saved and displayed.

Navi/-. From this screen, you can access level 1 via ESC.

5.2.4

Level 3

Parameter display

Here, the parameters that have been visibly switched for the corresponding configuration are displayed.
Navi/-. From this screen, you can access level 1 via ESC.
You can access the editing mode of the selected parameter via PROG (can be lead-sealed).

The password query is skipped if the password is "0000" and you will end up directly in editing mode in level
5.
If a valid password has been entered in the last 60 seconds, the password query is skipped and you will end
up directly in level 5.
If a password other than "0000" has been defined, you will be asked for the password in level 4.

5.2.5

Level 4

Password input

The currently active digit of the password can be incremented/decremented (0…9) via +/-.
ENT jumps to the next digit of the password entry.
The entered password is checked after pressing ENT at the 4th position.
ESC jumps back to the previous digit of the password entry.
The program goes back to Level 3 when you press ESC at the first digit of the password.

If you have forgotten the password, please contact our technical support and let them know the device ID.
You will receive a master password only relevant for your device.

5.2.6

Level 5

Parameter editing

In this level, the parameter previously selected in level 3 can be changed with +/-.
Confirm with ENT or use ESC to discard the change. In both cases, the display jumps to the corresponding
parameter in level 3.

Additionally, it will also be displayed here whether the value that was just edited corresponds to the default
configuration (dflt - default = base or factory setting), if it was edited within the normative permissible limit
values (edit – edited) or is set outside the normative permissible limit values (ncnf – non conform = does not
comply with the selected regulation or the selected standard).

Alongside thresholds, times, and modes, the 4 digits of the password also have 1 parameter each.

«
...
65
66
67
68
69
...
»

Summary of Contents for RE-NA003








































































Reviews:

No comments

Related manuals for RE-NA003

Brand: Mitsubishi Pages: 14

JPC SIDE PLATE POUCH SET MARITIME

Brand: Crye Precision Pages: 2

Brand: Tektronix Pages: 5

AccuVar ACV Series

Brand: Liebert Pages: 13

Brand: Arcserve Pages: 260

Flex 5150 Appliance

Brand: VERITAS Pages: 5

Brand: Arcteq Pages: 421

Brand: Zenith Pages: 40

Brand: Panasonic Pages: 1

Crouse-Hinds GFS Series

Brand: Eaton Pages: 2

Brand: RCA Pages: 2

MEGAPOD SA17-SK

Brand: SK Pages: 8

Brand: JSP Pages: 2

Brand: OTT Pages: 16

Brand: Falltech Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands