TELE System
x
Set Date
o
Using the numbers buttons and the / arrows, set the current date (the date cannot be modified
if “
Use of GMT
” is set to
ON
). Press the arrow for the next step.
x
Set Time
Using the numbers buttons and the / arrows, set the current hour (the hour cannot be modified if
“
Use of GMT
” is set to
ON
). Press the arrow for the next step.
x
Auto scan channels in Standby
Using the / arrows, select the frequency with which you want the channels to be updated in standby
mode (available options are:
Daily
,
Weekly
,
Monthly
and
OFF
).
Press the arrow for the next step.
x
Auto scan in Standby time
Using the numbers buttons and the / arrows, set the time for an automatic channels search in
Standby mode. Press the arrow for the next step.
x
Hotel mode
Using the / arrows, set to
ON
to activate the function.
CAUTION!
Once the Hotel function has been activated, you will no longer have access to the main menu. To access the main
menu again you need to deactivate the Hotel function by pressing the following buttons in order
16888+OK
.
x
Auto scan
Press the red “
Auto search
” button to start an automatic channel search (you will be requested to insert
your password). At the end of the scan, if no LCN channel position conflicts are detected, the receiver
will automatically go into viewing mode.
x
LCN conflict solutions
If the LCN function is on (see above) and more one TV or radio station has requested the same position
on the channels list, the receiver will detect the conflict and a list of the stations involved will appear on
the screen. With the / arrows select a channel and confirm with the
OK
button. Press
Exit
to
memorise your choice and close the display window.
If the user doesn’t intervene, the receiver will automatically resolve the conflicts after about one minute
and the user can proceed with viewing the channels.
x
Manual scan
Press the green “
Man Search
” button to manually search for channels (you will be requested to insert
your password). Using the / arrows, select the frequency on which you want to search for channels
and press
OK
.
4.1.2 TV setup
x
TV format
Define the
Video Format Rate
value (
16:9 Full Screen
/
Pillar Box
or
4:3 Letter Box
/
Pan Scan
) best fitted
to the characteristics of the TV screen connected to the receiver.
x
TV mode
Choose the standard (PAL or NTSC) in which to receive TV signals.
x
OSD transparency
Modify the transparency of the OSD menu when recalled.
x
Banner display time
Modify the viewing time of the channel banner.
x
Video output
Define the value of the video output (RGB or CVBS) best fitted to the characteristics of the TV screen
connected to the receiver.
x
Video Enhancement
Adapt the image on screen, by regulating two parameters (
Flesh tone
and
Black/white extension
),
according to the characteristics of the transmission, the TV room, and personal taste.
6
