English
TS6004
5
3 First time installation
After connecting the receiver (section
Errore. L'origine riferimento non è stata trovata.
) and inserting the
power cable in the main power socket, the receiver will automatically turn on. If this doesn’t happen, turn on
the receiver using the ON/ST.BY button on the front panel or on the remote control.
The
Installation
menu will appear on the screen where you will have to confirm or modify some parameters.
4 Menu and sub-menus
4.1 Setup
4.1.1 Installation
x
Country setting
Press the / arrows to select your Country from the list. Press the arrow to go to the next
parameter.
CAUTION!
Wrong Country setting can cause you to receive few or no channels at all.
x
OSD language
Using the / arrows, select the language desired from the On Screen Display (OSD). Press the
arrow for the next setup.
x
Audio language
Using the / arrows, select the audio language desired from those available (in case the TV program
is transmitted in several languages the receiver will automatically choose the language selected, if
available). Press the arrow for the next setup.
x
Subtitles language
Using the / arrows, select the subtitles language desired from those available (in case the TV
program is transmitted with subtitles the receiver will automatically choose the language selected, if
available). Press the arrow for the next setup.
x
LCN
1. After scanning the channels, Logical Channel Numbering (LCN) automatically orders the list of TV and
Radio channels according to the position requested by television stations. We advise you keep this
function active. However, you can modify it using the / arrows. Press the arrow for the next step.
NOTE
x
If
the
LCN Mode
is active, we suggest you not use the move channel function available from the
TV – TV/Radio
List
menu.
x
Auto stand by
This receiver comes with an energy saving function: after three hours of user inactivity, the receiver will
automatically go into standby mode. Two minutes before this happens, a message will appear on the
screen so that the user can stop the appliance from going into standby.
Using the / arrows, chose
ON
to keep the option active, or
OFF
to deactivate it.
Press the arrow for the next step.
CAUTION
If the on-off timer or a recording from the menu
System Setup
–
Program Timer
is set to more than three hours, it
is suggested you deactivate Sleep timer
x
GMT Usage
Select using the / arrows:
o
“
ON
”: date and time related to the Country chosen are set automatically.
o
“
OFF
”: user manually sets the date and time.
Press the arrow for the next step.
x
Time zone
Using the / arrows, select the time zone of the country where the decoder is installed.
Press the arrow for the next step.
