• Serial Ports.
• 1xRJ45 connector RS-232 port (DCE).
• 2xRJ45 connectors for RS-232 port (DCE) and/or RS-485 (2/4 wires). Its availability requires one additional ac-
cessory.
• WWAN: Depending on the model. ("L" models)
• 1xLTE Category 4 WWAN module with two SMA connectors.
• 2 Intenal SIM trays with 2FF form factor.
• External Reset/Recovery push button
2.4 Components
2.4.1 Front Panel
The front panel includes the status LEDs.
The following figure shows the front panel.
Fig. 3:
Front Panel
While the device is in startup mode, LED L lights up in green. Once the device has started up, the LEDs indicate the
following:
Table 2: LEDs
LED
Associated Inter-
face
Status
Description
ON
Power
Off
Green
Device is not powered.
Device is powered.
SW
Ethernet Switch in-
terface
Off
Green
Ethernet Switch is disabled or connection is not established.
Ethernet connection (link) established in, at least, one port:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
S
Cellular interface
Green
Amber
SIM1 operating SIM. This is processing traffic through the car-
rier for the SIM installed in this tray.
SIM2 operating SIM. This is processing traffic through the car-
rier for the SIM installed in this tray.
C
Cellular interface
Red
Cellular interface is unavailable, not installed or not registered.
2 Product Overview
Teldat S.A.
8
Regesta Smart PRO
