• Wireless devices can cause interference with other devices. Do not use the device in areas where medical equip-
ment is installed.
• To ensure the RED 2014/53/EU directive is complied with, the device must be at least 20 cm away from a person’s
body when operating.
4.2.5 Serial Ports connections
The Regesta Smart PRO includes three RJ45 connectors to provide serial ports. Depending on the model, the two
RJ45 connectors (labeled "Serial") may be inoperative.
4.2.5.1 Console Connector as Serial Port (CONF connector)
The console port can be converted into an RS-232 asynchronous DCE serial port. The latter has the following char-
acteristics:
(1)
DCE port.
(2)
RS-232 norm.
(3)
Maximum speed of 115200 bps.
(4)
Only the following signals are available: RxD, TxD and GND. See
on page 35 for more information about pin assignment.
(5)
RJ45 connector.
Fig. 21: Console connector
4.2.5.2 Asynchronous Serial Ports
The Asynchronous Serial Ports feature is optional and requires the addition of some hardware elements. Some mod-
els are equipped with 2 additional serial ports. The Regesta Smart PRO includes two RJ-45 connectors to provide
these serial ports, although they might not work in some models. Check the label to verify whether the device offers
serial ports or not, as well as to obtain information on their type.
Teldat S.A.
4 Connecting the router
Regesta Smart PRO
25
