To put the protector on, follow the steps below.
First, slide the case down and insert it in its proper position.
To block the case, move the fastening mechanism to a horizontal position and push down. You should hear a little
click.
Warning
The connector's protection case needs to be installed before the device is powered.
3.3 Installing a DIN rail mount accessory
The Regesta Smart PRO can be installed on a standard DIN rail. To mount it on a DIN rail, a special kit is needed.
This kit is included in the delivery. The DIN rail kit allows the device to be installed in different positions.
The kit contains 2 screws to adjust the rail mount to the underside of the device. There are a set of perforations on
the underside that allow you to place the DIN rail mount in two different positions:
3 Installing the Router
Teldat S.A.
16
Regesta Smart PRO
