Teldat Regesta Smart PRO, Installation Manual

Page: 15 / 45

Fig. 4:
Connector Panel
The elements found in the connector panel are as follows:
Table 1: Front Panel Elements
Item Description
A RST. Reset button. For further information on how the reset button works, please see RST
Button on page 28.
B CONF. RJ-45 connector providing access to the device's local console for configuration and
monitoring purposes. (This connector can also be used as an RS-232 asynchronous DCE
serial port.)
For more information about the CONF connector, refer to:
- Console Connector as Serial Port (CONF connector) on page 25
- Configuration Connector on page 35
- Configuration Interface on page 38
C WAN Gigabit Ethernet. SFP connector.
For more information about the WAN interface with SFP connector, refer to:
- WAN connections on page 21
- WAN SFP Connector on page 34
- WAN SFP Interface on page 37
D WAN Gigabit Ethernet. RJ-45 connector.
For more information about the WAN interface with Base-T connector, refer to:
- WAN connections on page 21
- WAN Base-T Connector on page 34
- WAN Base-T Interface on page 37
E LAN Gigabit Ethernet Port.
2 Product Overview Teldat S.A.
10 Regesta Smart PRO