4.3.10.3 REGISTERS SET
Modifies a given register.
Syntax:
ethernetX/X ETH+registers set
Example:
Set register at address 0x5b8c with value 0x20.
ethernet2/0 ETH+registers set
Hex Register: [0]? 0x5b8c
Hex Value: [0]? 0x20
Value read: 0x00000020
ethernet2/0 ETH+
Command history:
Release
Modification
11.00.06
The "Registers Set" command was introduced as of version 11.00.06.
11.01.02
The "Registers Set" command was introduced as of version 11.01.02.
4.3.11 REPEATER-SWITCH
In Ethernet interfaces internally connected to a switch, this command allows you to access the switch monitoring
menu. For a more in-depth explanation of the commands available in this menu, please see
Switch Monitoring Com-
mands
on page 64.
Syntax:
ethernetX/X ETH+repeater-switch
Example:
ethernet0/0 ETH+repeater-switch
-- Switch Monitoring Console --
ethernet0/0
4.3.12 STATUS
Displays information on the Ethernet interface: phyter model used, link status, auto-negotiation status and the speed
and duplex mode the interface operates at.
Syntax:
ethernet
X/X
ETH+status
Example:
ethernet0/0 ETH+status
Organizationally Unique Identifier (OUI) ... 80017(national)
Vendor model ............................... 2(DP83846A)
Model Revision ............................. 3
Link .............. Established
Auto-negotiation ... Completed
Duplex ............ Half duplex
Speed ............. 10 Mbps
ethernet0/0 ETH+
4.3.13 SUBIFCS
Displays information on subinterfaces configured over the Ethernet interface.
Syntax:
4 Monitoring Ethernet Interfaces
Teldat SA
26
LAN Interfaces
