10.3.3 LIST
Displays a variety of information on the OAM protocol status in the Ethernet interface that is being monitored. The
following options are available:
10.3.3.1 LIST DISCOVERY
Displays configuration information on the local OAM client and, where available, on the remote OAM client.
Syntax:
ethernet0/1 OAM list discovery
Example:
ethernet0/1 OAM list discovery
Local client configuration
Mode: active
Unidirection: not supported
Link Monitor: supported
Remote loopback: supported
MIB retrieval: not supported
MTU size: 1500
Remote client configuration
MAC address: 0012430816D1
Mode: active
Unidirection: not supported
Link Monitor: supported
Remote loopback: supported
MIB retrieval: not supported
MTU size: 1500
Organizationally Unique Identifier (OUI): 0x0C0
ethernet0/1 OAM
10.3.3.2 LIST RUNTIME
Displays internal information on the OAM protocol, such as the status variables for the different OAM subsystems
(
Discovery
,
Parser
and
Multiplexer
), status of the OAM timers, the current status for the Discovery states machine,
etc.
Syntax:
ethernet0/1 OAM list runtime
Example:
ethernet0/1 OAM list runtime
Runtime settings
Local_pdu: ANY
Local_mux: FWD
Local_par: FWD
Local_link_status: OK
Local_satisfied: YES
Local_stable: YES
Loopback_state: OFF
PDU_cnt: 9
PDU_timer: ON
Lost_link_timer: ON
Link_monitor_timer: ON
Loopback_timer: OFF
Remote_state_valid: YES
Remote_stable: YES
Remote_evaluating: NO
Current local Discovery FSM state: SEND_ANY
ethernet0/1 OAM
Teldat SA
10 Ethernet OAM Monitoring
LAN Interfaces
97
