Command history:
Release
Modification
11.01.07
The "no flow-control" command was introduced as of version 11.01.07.
3.3.15.4 NO INPUT-BUFFERS
Uses the default value for the number of buffers used in reception. Default depends on the type of driver.
Example:
ethernet0/0 config>no input-buffers
ethernet0/0 config>
3.3.15.5 NO MEDIA-TYPE
Uses the default value for the media type. Default depends on the type of driver.
Example:
ethernet0/0 config>no media-type
ethernet0/0 config>
3.3.15.6 NO PHY-SHUTDOWN
Enables an Ethernet interface at the physical layer.
Example:
ethernet0/0 config>no phy-shutdown
ethernet0/0 config>
3.3.15.7 NO PROMISCUOUS-MODE
Disables the promiscuous-mode.
Example:
ethernet0/0 config>no promiscuous-mode
ethernet0/0 config>
Command history:
Release
Modification
11.00.07
This command was introduced as of version 11.00.07.
11.01.02
This command was introduced as of version 11.01.02.
3.3.16 OAM
Allows a user to access the configuration menu for the interface’s Ethernet OAM feature. For further information,
please see the
Configuring Ethernet OAM
chapter.
Syntax:
ethernet
X
/
X
config>oam
Example:
ethernet3/0 config>oam
-- Ethernet OAM interface configuration --
ethernet3/0 OAM config>
3.3.17 PHY-SHUTDOWN
Disables an Ethernet interface at the physical layer. This command is only available in Ethernet interfaces that aren’t
internally connected to a switch.
Example:
3 Configuring Ethernet Interfaces
Teldat SA
16
LAN Interfaces
