Tektronix WFM 601A Service Manual Download Page 13 | Manualshive

Page: 13 / 368

background image

WFM 601A, WFM 601E, & WFM 601M Service Manual

ix

General Safety Summary

Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it. To avoid potential hazards, use this
product only as specified.

Only qualified personnel should perform service procedures.

Use Proper Power Cord.

Use only the power cord specified for this product and

certified for the country of use.

Ground the Product.

This product is grounded through the grounding conductor

of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.

Do Not Operate Without Covers.

Do not operate this product with covers or panels

removed.

Use Proper Fuse.

Use only the fuse type and rating specified for this product.

Avoid Exposed Circuitry.

Do not touch exposed connections and components

when power is present.

Observe All Terminal Ratings.

To avoid fire or shock hazard, observe all ratings

and marking on the product. Consult the product manual for further ratings
information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this

product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Provide Proper Ventilation.

Refer to the manual’s installation instructions for

details on installing the product so it has proper ventilation.

Terms in this Manual.

These terms may appear in this manual:

WARNING.

Warning statements identify conditions or practices that could result

in injury or loss of life.

To Avoid Fire or

Personal Injury

Symbols and Terms

«
...
11
12
13
14
15
...
»

Summary of Contents for WFM 601A

















































































































































































































































































































































































Reviews:

No comments

Related manuals for WFM 601A

Brand: Ude Pages: 3

Brand: Opus Technologies Pages: 24

Brand: Pyle Pages: 8

Brand: Takstar Pages: 20

Brand: Phonic Pages: 24

Brand: MXL Pages: 2

Brand: Galaxy Audio Pages: 20

Brand: RINGSPANN Pages: 6

Brand: Solid State Logic Pages: 8

Brand: Optimus Pages: 2

Brand: Shure Pages: 2

Brand: Hotec Pages: 4

Sailor Radiotelex

Brand: Thrane&Thrane Pages: 46

Brand: Senal Pages: 12

7100DX QUAD-RAK

Brand: Lightspeed Pages: 27

Brand: Electro-Voice Pages: 3

Brand: Electro-Voice Pages: 4

Brand: Current Thinking Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands