Tektronix WFM 601A, Service Manual, Page: 23 / 368

Specifications
1–2
WFM 601A, WFM 601E, & WFM 601M Service Manual
H
Lightning and Vector displays
H
Reclocked Serial Component Digital output following A/B switching
H
Video Reference: Internal Serial Component signal (follows A/B switching)
or external composite
H
Audio Lissajous display (WFM 601A)
An expanded feature set is available through menus. You select menu items with
multi-use bezel buttons and knobs. When you select a menu item, such as
Voltage Cursors, on-screen labels show the current function of the bezel buttons
and knobs.
The waveform monitor provides an internal calibrator signal to set both vertical
and horizontal gain. The calibrator signal is a 700 mV, 100 kHz signal. Press the
CONFIG button and use the bezel knob to select the Calibrate menu. Press the
CAL SIG button to turn on the calibrator signal.
Characteristics Tables
Table 1–1 lists the electrical specifications for the waveform monitors. Perfor-
mance requirements are generally quantitative and can be tested by the Perfor-
mance Verification procedure this manual. Reference information describes
useful operating parameters that have typical values. These parameters are not
directly checked in the performance verification procedure. Table 1–8 lists the
EMC compliance specifications.
The Performance Requirements listed in the electrical specification portion of
these specifications apply over an ambient temperature range of 0
°
C to +40
°
C.
The rated accuracies are valid when the instrument is calibrated at an ambient
temperature range of +20
°
C to +30
°
C, after a warm-up time of 20 minutes.
Menus
Calibrator