Tektronix TMS 440 SH-3 7708, Instruction Manual

Page: 56 / 100

Acquiring and Viewing Disassembled Data
2–16
TMS 440 SH-3 7708 Microprocessor Support
The Subroutine display format shows only the first fetch of subroutine call and
return instructions. It will display conditional subroutine calls if they are
considered to be taken.
Instructions that generate a subroutine call or a return in the SH-3 7708 micro-
processor are as follows:
BSR BSRF JSR RTS
RTE TRAPA
Changing How Data is Displayed
There are common fields and features that allow you to further modify displayed
data to suit your needs. You can make common and optional display selections in
the Disassembly property page (the Disassembly Format Definition overlay).
You can make selections unique to the SH-3 7708 support to do the following
tasks:
H
Change how data is displayed across all display formats
H
Change the interpretation of disassembled cycles
H
Display exception vectors
You can make optional selections for acquired disassembled data. In addition to
the common selections (described in the information on basic operations), you
can change the displayed data in the following ways:
Show: Hardware (Default)
Software
Control Flow
Subroutine
Highlight: Software (Default)
Control Flow
Subroutine
None
Disassemble Across Gaps: Yes (Default)
No
VBR.
If you relocate the vector table, the disassembler can be informed of the
new location by entering a Hex base address of eight digits in the fill in field. The
default value for VBR (Vector Based Register) is 00000000.
Subroutine Display
Format
Optional Display
Selections