Tektronix TMS 440 SH-3 7708, Instruction Manual

Page: 29 / 100

Getting Started
TMS 440 SH-3 7708 Microprocessor Support
1–13
Table 1–3 shows the probe section and channel assignments for the Control
group and the microprocessor signal to which each channel connects. By default
the Control channel group assignments are displayed as symbols. The symbol
table file name is SH–3_Ctrl.
Table 1–3: Control channel group assignments
Bit order Section:channel SH-3 7708 signal name
10 Clk:3 L_BS~
9 Clk:1 L_RAS~
8 C2–3 DL_RASD~
7 Clk:2 L_CAS~
6 C2–0 DL_CASD~
5 C2–2 DL_WER~
4 C3–3 RD/WR~
3 C1–4 CASHH~/CAS2H~
2 C1–0 CASHL~/CAS2L~
1 C0–4 CASLH~
0 C0–0 CASLL~/CAS~/OE~
Table 1–4 shows the probe section and channel assignments for the CHip_Sel
group and the microprocessor signal to which each channel connects. By default,
this channel group is not displayed.
Table 1–4: Chip_Sel channel group assignments
Bit order Section:channel SH-3 7708 signal name
8 C3–6 MD4/CE2B~
7 C3–2 MD3/CE2A~
6 A3–7 CS6~/CE1B~
5 A3–6 CS5~/CE1A~
4 A3–5 CS4~
3 A3–4 CS3~
2 A3–3 CS2~
1 A3–2 CS1~
0 C2–6 CS0~