Getting Started
5.
Run the GPS7 module diagnostics:
a.
Press the
MODULE
button until
GPS7
appears.
b.
Use the up (
▲
) or down (
▼
) arrow button to select
DIAGNOSTICS
.
c.
Press the
ENTER
button.
d.
Use the left (
◄
) or right (
►
) arrow button to scroll through the menu.
Take note of any errors or warnings.
6.
Load the factory preset:
a.
Press the
MODULE
button until
TG700
appears.
b.
Press
ENTER
to select
Preset
.
c.
If needed, use the up (
▲
) or down (
▼
) arrow button to select
Recall
.
d.
Press the left (
◄
) arrow button until
Factory Preset
appears.
e.
Press the
ENTER
button to load the preset.
7.
When loading is complete, press the
CANCEL
button to exit the Factory
Default menu.
DC antenna output power voltage.
1.
Connect the BNC-to-Banana-plug adapter to the voltmeter.
2.
Connect the BNC T to the adapter.
3.
Connect a 75
Ω
BNC cable to the other end of the BNC T connector.
4.
Connect the other end of the cable to the antenna input on the rear of the
module.
5.
Set the antenna power to 3.3 V:
a.
Press the
MODULE
button to navigate to the
GPS7
module.
b.
Use the up (
▲
) or down (
▼
) arrow button to select
GPS SETUP
.
c.
Press the
ENTER
button.
d.
Use the up (
▲
) or down (
▼
) arrow button to select
Antenna Power
.
e.
Use the left (
◄
) or right (
►
) arrow button to select
3.3 V
.
f.
Press the
ENTER
button.
6.
Check that the voltmeter shows between 3.3 V and 4 V.
7.
Use the left (
◄
) arrow to set the antenna voltage to 5 V.
8.
Press the
ENTER
button.
9.
Check that the voltmeter shows between 5 V and 6 V.
TG700 TV Signal Generator Platform User Manual
1–25
Summary of Contents for TG700
