Operating Basics
SIGNAL KEY ASSIGN
Submenu
Use this menu to assign signal sets to a speci
fi
c front-panel test signal button. If
your mainframe has 64 MB of memory installed, you can also assign a frame
picture
fi
le created by the Frame Picture Generator to the OTHER test signal
button. The following
fi
gure shows the SIGNAL KEY ASSIGN submenu. (See
page 1-2,
Figure 2-21: SIGNAL KEY ASSIGN submenu
TEST SIGNAL KEY ASSIGN.
Assigns signal sets to a speci
fi
c front-panel test signal
button. The mainframe is shipped from the factory with signal sets corresponding
to each button name already assigned. For example, when you press the
COLOR
BAR
test signal button, the three types of color bars signals (100% Color Bars,
75% Color Bars, and SMPTE Color Bars) are available for output.
Perform the following steps to assign signal sets to a speci
fi
c test signal button.
1.
Use the left (
◄
) or right (
►
) arrow button to select the module to which you
want to assign signal sets, and then press the
ENTER
button.
This will display the following submenu to assign signal sets. The
fi
rst line
shows the name of the test signal button, and second line shows the name of
the assigned signal set.
2.
Use the up (
▲
) or down (
▼
) arrow button to select the test signal button to
which you want to assign a signal set (for example
COLOR BAR KEY
).
3.
Use the left (
◄
) or right (
►
) arrow button to select the signal set you want to
assign to the selected test signal button (for example
COLOR BAR
).
4.
Press the
ENTER
button to assign the signal set to the selected test signal
button.
5.
Repeat steps 2 to 4 until all signal set assignments are completed.
2–24
TG700 TV Signal Generator Platform User Manual
Summary of Contents for TG700
